ANYCUBIC PLA 3D Printer Filament, RFID 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Texture Grey - Color 1kg Pla Gray
Oferta
Precio:
-25%
Q245.00
Precio recomendado:
Q325.00
Producto de Tienda Mundial
Ver detalle
Recíbelo entre 09 de Diciembre al 18 de Diciembre
Recíbelo entre 09 de Diciembre al 18 de Diciembre
Garantía:
Verifica las políticas de Tienda Mundial
Costo de envío: Q20.00
* Precio y unidades sujetos a revisión de Pacifiko
- Producto - Color 1kg Pla Gray
- 【RFID Filament Enhanced Smart Printing】The Anycubic Color Engine Pro precisely detects RFID filaments, automatically optimizing printer settings for the best results. No more tedious and complicated setup adjustments, ensures precise execution of every print job and minimizes filament wastage. Just load the filaments and start printing. This feature is only applicable to the Anycubic Kobra 3 Combo 3D Printer.
- 【Accuracy & Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You dont worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
- 【Neat Spool & Premium Quality】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
- 【Clog-Free & Bubble-Free】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
- 【For Most 3D Printers】The Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.
Información del producto
| PID | ODZlNTdhMz |
| Número de modelo | B0834W5L3L |
| Garantía | 7 días sujeto a las políticas de Tienda Mundial |
Garantía y Soporte
Para más información sobre Garantías en Pacifiko visitar la siguiente pagina: Garantías